Fuel Hose for Mercedes W201 / W116 / W126 (Carburetor, Low Pressure)
Fuel hose for Mercedes W201 / W116 / W126 carburetor models — robust low-pressure hose for supply and return lines in fuel tank and carburetor areas of classic Mercedes series.
Inner diameter: 7.5 mm
Length: approx. 40 cm
Thread connection: M18×1.5
Textile-braided petrol hose
Pre-assembled for easy installation
Ethanol-resistant NBR construction with fabric reinforcement
Suitable for tank, pre-filter and return line sections
Confidence on the road: reliability instead of concern
With this fuel hose for Mercedes models of the W201, W116 and W126 series, concerns about brittle fuel lines and petrol odor can be significantly reduced. The hose is specifically designed for low-pressure applications and offers increased kink and pressure resistance thanks to its textile outer braid and internal reinforcement. Reference numbers: 116 470 3975, 1164703975, A1164703975. Replacing aged hoses ensures safer driving during tours, events and everyday use.
Technical fundamentals that convince
The hose is based on NBR (nitrile rubber), a fuel- and oil-resistant material. The inner diameter is 7.5 mm, length approx. 40 cm, with M18×1.5 thread connection. The design fulfills practical requirements for reliable low-pressure connections (tank–pre-filter–fuel pump–carburetor or return line). Not suitable for high-pressure fuel injection systems.
Fitment for classic Mercedes series
The hose is suitable for carburetor applications and low-pressure sections in W201 (190), W116 (e.g. 280 S) and W126 (including carburetor versions up to 11/1985). Typical installation areas include the tank section (tank filter–feed line), engine bay (carburetor supply) and return lines. When selecting, always verify inner diameter, length and connection type on the vehicle to ensure a stress-free and secure installation.
Installation practice and safety measures
Replacement can be carried out with standard tools in approximately 30–90 minutes per hose section. Clean, straight cuts are recommended, along with fuel-resistant clamps (Oetiker/EFI type) and kink-free routing away from hot components. Disconnect the battery and relieve system pressure before starting. After installation, perform a leak test at idle and re-check connections after a short drive.
For safe driving operation and long-term value retention, replacing aged hoses with a textile-braided, fuel-resistant low-pressure fuel hose is highly recommended — ideal for maintaining classic Mercedes vehicles.
Product safety information Manufacturer information: TRUCKTEC Automotive GmbH
Katharina-Loth-Str. 2
St. Ingbert, Deutschland, 66386
[email protected]
https://www.trucktec.de/impressum/
| Item information | Value |
|---|---|
| Car Brand: | Mercedes |
| Shipping weight: | 0,60 kg |
| Item weight: | 0,10 kg |
| TecDocArticleNo: | 02.53.033 |
| OE Nummer: | 1164703975 |
Fuel Hose for Mercedes W201 / W116 / W126 (Carburetor, Low Pressure)
Fuel hose for Mercedes W201 / W116 / W126 carburetor models — robust low-pressure hose for supply and return lines in fuel tank and carburetor areas of classic Mercedes series.
Inner diameter: 7.5 mm
Length: approx. 40 cm
Thread connection: M18×1.5
Textile-braided petrol hose
Pre-assembled for easy installation
Ethanol-resistant NBR construction with fabric reinforcement
Suitable for tank, pre-filter and return line sections
Confidence on the road: reliability instead of concern
With this fuel hose for Mercedes models of the W201, W116 and W126 series, concerns about brittle fuel lines and petrol odor can be significantly reduced. The hose is specifically designed for low-pressure applications and offers increased kink and pressure resistance thanks to its textile outer braid and internal reinforcement. Reference numbers: 116 470 3975, 1164703975, A1164703975. Replacing aged hoses ensures safer driving during tours, events and everyday use.
Technical fundamentals that convince
The hose is based on NBR (nitrile rubber), a fuel- and oil-resistant material. The inner diameter is 7.5 mm, length approx. 40 cm, with M18×1.5 thread connection. The design fulfills practical requirements for reliable low-pressure connections (tank–pre-filter–fuel pump–carburetor or return line). Not suitable for high-pressure fuel injection systems.
Fitment for classic Mercedes series
The hose is suitable for carburetor applications and low-pressure sections in W201 (190), W116 (e.g. 280 S) and W126 (including carburetor versions up to 11/1985). Typical installation areas include the tank section (tank filter–feed line), engine bay (carburetor supply) and return lines. When selecting, always verify inner diameter, length and connection type on the vehicle to ensure a stress-free and secure installation.
Installation practice and safety measures
Replacement can be carried out with standard tools in approximately 30–90 minutes per hose section. Clean, straight cuts are recommended, along with fuel-resistant clamps (Oetiker/EFI type) and kink-free routing away from hot components. Disconnect the battery and relieve system pressure before starting. After installation, perform a leak test at idle and re-check connections after a short drive.
For safe driving operation and long-term value retention, replacing aged hoses with a textile-braided, fuel-resistant low-pressure fuel hose is highly recommended — ideal for maintaining classic Mercedes vehicles.
Product safety information Manufacturer information: TRUCKTEC Automotive GmbH
Katharina-Loth-Str. 2
St. Ingbert, Deutschland, 66386
[email protected]
https://www.trucktec.de/impressum/
| Item information | Value |
|---|---|
| Car Brand: | Mercedes |
| Shipping weight: | 0,60 kg |
| Item weight: | 0,10 kg |
| TecDocArticleNo: | 02.53.033 |
| OE Nummer: | 1164703975 |
Rezensionen
Es gibt noch keine Rezensionen.